Affordable mobile digital amateur radio communication
The Digital Mobile Radio standard was first agreed upon in 2005 by a group of amateur radio manufacturers seeking
a solution to the proliferation of incompatible proprietary digital solutions on the market at that time. The lack of standards and
interoperability had caused the market to fracture, as each manufacturer attempted to
postion their digital solution as "the standard" and consumers afraid of placing their bet on a technology which might end up
not widely supported, stood on the sidelines waiting for a clear leader to emerge.
DMR was seen as a means to provide an inexpensive, broadly supported
framework for digitally interoperable radios using two-slot time division multiple access (TDMA) in a 12.5 kHz channel.
Once ratified (and subsequently managed by an industry funded independent organization), DMR has been recognized by
the European Telecommunications Union and published as a standard. While DMR continued to make inroads
into the amateur radio market, proprietary standards continued to own considerable market share,
especially for business use, where interoperability is not essential.
ARPSC Joins the Digital Age
By 2015, with the Amateur market still largely split among multiple standards, ARPSC leadership undertook the task to
evaluate a number of digital technologies available to the Amateur community.
After considerable research, real world tests and equipment assessment, ARPSC chose the DMR platform. Initially
temporarily deployed in support of the 2016 Brooksie Way, DMR was found to be well suited for the organization.
As such, with the support of Oakland County, the existing analog UHF repeater was
retired and on February 1, 2017 the new ARPSC DMR repeater was placed into service.
One of the key criteria for the selection of DMR was the availability of economical equipment that the
ARPSC volunteers would need to acquire. As such, the ARPSC DMR repeater is compatible
with competitively priced DMR Tier II radios such as the TYT MD-380 from Tytera pictured above-right
(image courtesy of Tytera),
Command Systems CS-800 mobile rig, and HT's by a number of manufacturers.
Note that some radios (including the recently introduced Baofeng GT-3 DMR Mark IV Two Way Radio) although marketed as "DMR Compatible"
are actually Tier I radios and are not fully compatible with the two time-slot, Tier II technology in use across Michigan
and at ARPSC. Although this sounds obscure, if you are in the market for a radio to be compatible with the ARPSC repeater,
be sure to look for radios complying with digital protocol ETSI TS102 361-1.-2.-3.
TYT MD-380 code plug
In order to operate correctly, every DMR radio requires programming to instruct the radio on how to access local repeaters.
This includes frequencies, time slots, etc. As a service to its members, ARPSC provides a TYT MD-380 compatible "code-plug" which is configured
for many south-east Michigan repeaters, and specifically for the ARPSC DMR repeater. This is provided "AS IS" without warranty
or support for use by licensed amateur radio operators.
Right Click here and select Save Target or Link As...
to save the file to your hard drive for use in the TYT Loader software.
If you would like to configure your radio manually, the ARPSC DMR repater is configured as follows:
Oakland County ARPSC DMR Repeater
DMR: CC:1 Slot:1 TGID: 8901
||DMR: CC:1 Slot:2 TGID: 8902
DMR has become a great tool for ARPSC activations as it leaves the VHF repeater available for the amateur community or
emergency operations, while DMR in the UHF band provides two separate channels to support the activity at hand. Typically
one channel is used in a directed net format, while the other can serve as either support, emergency operations, or routine non-emergency
amateur use. For ARPSC activations such as the Woodward Dream Cruise, the Berkeley Parade
of Cars, and the annual Brooksie Way half-marathon, DMR provides more capability, marginally better reception
than traditional FM UHF, and requires less disruption to the community than dedicating the county-wide VHF repeater
to an activity.
Find out more about DMR
The following videos are helpful in understanding and using DMR and MD-380